"Aerosol" means the suspended liquid or solid particles in air (except cloud droplets).

"Age of stratospheric air" means an estimate of the time since a parcel of stratospheric air was last in contact with the troposphere.

No help available.

Potential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.

No help available.

"anomaly" means difference from climatology.

cloud_base refers to the base of the lowest cloud.

cloud_top refers to the top of the highest cloud.

cloud_base refers to the base of the lowest cloud. Convective cloud is that produced by the convection schemes in an atmosphere model.

cloud_top refers to the top of the highest cloud. Convective cloud is that produced by the convection schemes in an atmosphere model.

No help available.

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.

Air temperature is the bulk temperature of the air, not the surface (skin) temperature.

"anomaly" means difference from climatology. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.

cloud_top refers to the top of the highest cloud. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. A lapse rate is the negative derivative of a quantity with respect to increasing height above the surface, or the (positive) derivative with respect to increasing depth.

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. Air temperature excess and deficit are calculated relative to the air temperature threshold.

Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.

Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of area_fraction, provide a coordinate variable or scalar coordinate variable of land_cover or surface_cover. Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X.

The surface called "surface" means the lower boundary of the atmosphere. The fraction of horizontal area where the surface specified by the axes other than horizontal axes, for instance an isobaric surface, is below the (ground or sea) surface.

Absolute vorticity is the sum of relative vorticity and the upward component of vorticity due to the Earth's rotation.

The atmosphere boundary layer thickness is the "depth" or "height" of the (atmosphere) planetary boundary layer.

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

"Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets).

"condensed_water" means liquid and ice. Convective cloud is that produced by the convection schemes in an atmosphere model. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

Convective cloud is that produced by the convection schemes in an atmosphere model. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts only.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Atmosphere_Xward_stress is a stress which tends to accelerate the atmosphere in direction X.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Atmosphere energy content" has not yet been precisely defined! Please express your views on this quantity on the CF email list.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

No help available.

"Horizontal" indicates that the streamfunction applies to a horizontal velocity field on a particular vertical level.

A velocity is a vector quantity. "Horizontal" indicates that the velocity potential applies to a horizontal velocity field on a particular vertical level.

See Appendix D of the CF convention for information about dimensionless vertical coordinates.

See Appendix D of the CF convention for information about dimensionless vertical coordinates.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

"ln_X" means natural logarithm of X. X must be dimensionless. See Appendix D of the CF convention for information about dimensionless vertical coordinates.

"Mass_of_air" means the mass due solely to the gaseous constituents of the atmosphere. The standard name for the mass including precipitation and aerosol particles is atmosphere_mass_per_unit_area.

"X_area" means the horizontal area occupied by X within the grid cell.

No help available.

"longwave" means longwave radiation. Net absorbed radiation is the difference between absorbed and emitted radiation.

"shortwave" means shortwave radiation. Net absorbed radiation is the difference between absorbed and emitted radiation.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Atmosphere_Xward_stress is a stress which tends to accelerate the atmosphere in direction X.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets).

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol. "Pm1 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 1 micrometer.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "atmosphere_optical_thickness_due_to_water_in_ambient_aerosol" refers to the optical thickness due to the water that is associated with aerosol particles due to hygroscopic growth in ambient air, affecting the particle's radius and refractive index. It corresponds to the difference between the total dry aerosol optical thickness and the total ambient aerosol optical thickness.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)

Relative vorticity is the upward component of the vorticity vector i.e. the component which arises from horizontal velocity.

See Appendix D of the CF convention for information about dimensionless vertical coordinates.

See Appendix D of the CF convention for information about dimensionless vertical coordinates.

alias: specific_convective_available_potential_energy

"specific" means per unit mass. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.) Convective(ly) available potential energy is often abbreviated as "CAPE".

alias: atmosphere_so4_content

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Water" means water in all phases.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.

A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).

A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).

A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).

A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).

"Baseflow" is subsurface runoff which takes place below the level of the water table. Runoff is the liquid water which drains from land. "Amount" means mass per unit area.

"Beaufort wind force" is an index assigned on the Beaufort wind force scale and relates a qualitative description of the degree of disturbance or destruction caused by wind to the speed of the wind. The Beaufort wind scale varies between 0 (qualitatively described as calm, smoke rises vertically, sea appears glassy) (wind speeds in the range 0 - 0.2 m s-1) and 12 (hurricane, wave heights in excess of 14 m) (wind speeds in excess of 32.7 m s-1).

Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. "Bedrock" is the solid Earth surface beneath land ice or ocean water.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. "Bedrock" is the solid Earth surface beneath land ice or ocean water. The zero of bedrock altitude change is arbitrary. Isostatic adjustment is the vertical movement of the lithosphere due to changing surface ice and water loads.

No help available.

"Biomass burning carbon" refers to the rate at which biomass is burned by forest fires etc., expressed as the mass of carbon which it contains. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Bolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).

Bolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. "Northward" indicates a vector component which is positive when directed northward (negative southward).

Bolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. "Upward" indicates a vector component which is positive when directed upward (negative downward).

The brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area.

Frequency is the number of oscillations of a wave per unit time.

The surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. "Canopy" means the plant or vegetation canopy. "Canopy and surface water" means the sum of water on the ground and on the canopy.

Height is the vertical distance above the surface. "Canopy" means the plant or vegetation canopy.

"Canopy" means the plant or vegetation canopy. "Canopy_temperature" is the bulk temperature of the canopy, not the surface (skin) temperature.

"Canopy" means the plant or vegetation canopy. "Throughfall" is the part of the precipitation flux that reaches the ground directly through the vegetative canopy, through intershrub spaces in the canopy, and as drip from the leaves, twigs, and stems (but not including snowmelt). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Amount" means mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. "Canopy" means the plant or vegetation canopy. The canopy water is the water on the canopy.

The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "wrt" means with respect to. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Atmosphere energy content" has not yet been precisely defined! Please express your views on this quantity on the CF email list. See Appendix D of the CF convention for information about dimensionless vertical coordinates.

The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "wrt" means with respect to. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. See Appendix D of the CF convention for information about dimensionless vertical coordinates.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. "Content" indicates a quantity per unit area. "Water" means water in all phases.

The surface called "surface" means the lower boundary of the atmosphere. "change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. "Amount" means mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer.

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover".

cloud_base refers to the base of the lowest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.

cloud_top refers to the top of the highest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.

alias: chlorophyll_concentration_in_sea_water

No help available.

No help available.

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. Convective cloud is that produced by the convection schemes in an atmosphere model.

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". Convective cloud is that produced by the convection schemes in an atmosphere model.

cloud_base refers to the base of the lowest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. Convective cloud is that produced by the convection schemes in an atmosphere model.

cloud_base refers to the base of the lowest cloud. Height is the vertical distance above the surface. Convective cloud is that produced by the convection schemes in an atmosphere model.

cloud_top refers to the top of the highest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. Convective cloud is that produced by the convection schemes in an atmosphere model.

cloud_top refers to the top of the highest cloud. Height is the vertical distance above the surface. Convective cloud is that produced by the convection schemes in an atmosphere model.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

No help available.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

The Coriolis parameter is twice the component of the earth's angular velocity about the local vertical i.e. 2 W sin L, where L is latitude and W the angular speed of the earth.

A numerical correction which is added to modelled negative specific humidities in order to obtain a value of zero.

Depth is the vertical distance below the surface.

Dew point depression is also called dew point deficit. It is the amount by which the air temperature exceeds its dew point temperature. Dew point temperature is the temperature at which a parcel of air reaches saturation upon being cooled at constant pressure and specific humidity.

Dew point temperature is the temperature at which a parcel of air reaches saturation upon being cooled at constant pressure and specific humidity.

In some atmosphere models, the difference of air pressure from model reference is a prognostic variable, instead of the air pressure itself. The model reference air pressure is a model-dependent constant.

The term "Exner function" is applied to various quantities in the literature. "Dimensionless Exner function" is the standard name of (p/p0)^(R/Cp), where p is pressure, p0 a reference pressure, R the gas constant and Cp the specific heat at constant pressure. This quantity is also the ratio of in-situ to potential temperature. Standard names for other variants can be defined on request.

"direction_of_X" means direction of a vector, a bearing. A velocity is a vector quantity. Sea ice velocity is defined as a two-dimensional vector, with no vertical component.

"direction_of_X" means direction of a vector, a bearing. A velocity is a vector quantity.

No help available.

"[horizontal_]divergence_of_X" means [horizontal] divergence of a vector X; if X does not have a vertical component then "horizontal" should be omitted. A velocity is a vector quantity. Sea ice velocity is defined as a two-dimensional vector, with no vertical component.

"[horizontal_]divergence_of_X" means [horizontal] divergence of a vector X; if X does not have a vertical component then "horizontal" should be omitted. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Downward" indicates a vector component which is positive when directed downward (negative upward). Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward.

ground_level means the land surface (beneath the snow and surface water, if any). "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

ground_level means the land surface (beneath the snow and surface water, if any). "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Downward" indicates a vector component which is positive when directed downward (negative upward). The vertical heat flux in air is the sum of all heat fluxes i.e. radiative, latent and sensible. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward.

"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. "Downward" indicates a vector component which is positive when directed downward (negative upward).

"y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. "Downward" indicates a vector component which is positive when directed downward (negative upward).

"longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.

Downwelling radiation is radiation from above. It does not mean "net downward". A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A photon flux is specified in terms of numbers of photons expressed in moles.

Downwelling radiation is radiation from above. It does not mean "net downward". Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.

Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles.

Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.

Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength.

Downwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".

Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.

Downwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.

Downwelling radiation is radiation from above. It does not mean "net downward". A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A photon flux is specified in terms of numbers of photons expressed in moles.

Downwelling radiation is radiation from above. It does not mean "net downward". "spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.

Downwelling radiation is radiation from above. It does not mean "net downward". "spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.

Downwelling radiation is radiation from above. It does not mean "net downward". "spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.

Downwelling radiation is radiation from above. It does not mean "net downward". "spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Downwelling radiation is radiation from above. It does not mean "net downward". "spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Downwelling radiation is radiation from above. It does not mean "net downward". "spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".

Downwelling radiation is radiation from above. It does not mean "net downward". Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

The WMO definition of sunshine is that the surface incident radiative flux from the solar beam (i.e. excluding diffuse skylight) exceeds 120 W m-2. "Duration" is the length of time for which a condition holds.

The dynamical tropopause used in interpreting the dynamics of the upper troposphere and lower stratosphere. There are various definitions of dynamical tropopause in the scientific literature.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

"Water" means water in all phases. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Sea ice velocity is defined as a two-dimensional vector, with no vertical component.

A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).

Eastward indicates a vector component which is positive when directed eastward (negative westward).

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Wind shear is the derivative of wind with respect to height.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. The equilibrium line is the locus of points on a land ice surface at which ice accumulation balances ice ablation over the year.

Potential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The equivalent pressure of a particular constituent of the atmosphere is the surface pressure exerted by the weight of that constituent alone.

No help available.

alias: equivalent_thickness_at_stp_of_atmosphere_o3_content

"stp" means standard temperature (0 degC) and pressure (101325 Pa). "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The equivalent thickness at STP of a particular constituent of the atmosphere is the thickness of the layer that the gas would occupy if it was separated from the other constituents and gathered together at STP.

No help available.

Forecast period is the time interval between the forecast reference time and the validity time. A period is an interval of time, or the time-period of an oscillation.

The forecast reference time in NWP is the "data time", the time of the analysis from which the forecast was made. It is not the time for which the forecast is valid; the standard name of time should be used for that time.

Fractional saturation is the ratio of some measure of concentration to the saturated value of the same quantity.

Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.

No help available.

"frozen_water" means ice. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy.

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface.

"anomaly" means difference from climatology. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface.

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

Global average sea level change is due to change in volume of the water in the ocean, caused by mass and/or density change, or to change in the volume of the ocean basins, caused by tectonics etc. It is sometimes called "eustatic", which is a term that also has other definitions. It differs from the change in the global average sea surface height relative to the centre of the Earth by the global average vertical movement of the ocean floor. Zero sea level change is an arbitrary level.

Global average thermosteric sea level change is the part caused by change in density due to change in temperature i.e. thermal expansion. Zero sea level change is an arbitrary level.

Latitude is positive northward; its units of degree_north (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_latitude should be used instead of latitude. Grid latitude is positive in the grid-northward direction, but its units should be plain degree.

Longitude is positive eastward; its units of degree_east (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_longitude should be used instead of longitude. Grid longitude is positive in the grid-eastward direction, but its units should be plain degree.

Gross primary productivity is the rate of synthesis of biomass per unit area from inorganic precursors by autotrophs, especially by photosynthesising plants using sunlight for energy. The producers also respire some of this biomass and the difference is net_primary_producivity. "Productivity of carbon" refers to the production of biomass expressed as the mass of carbon which it contains.

Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Height is the vertical distance above the surface.

No help available.

cloud_top refers to the top of the highest cloud. Height is the vertical distance above the surface.

"Respiration carbon" refers to the rate at which biomass is respired expressed as the mass of carbon which it contains. Heterotrophic respiration is respiration by heterotrophs ("consumers"), which are organisms (including animals and decomposers) that consume other organisms or dead organic material, rather than synthesising organic material from inorganic precursors using energy from the environment (especially sunlight) as autotrophs ("producers") do. Heterotrophic respiration goes on both above and within the soil. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

Humidity mixing ratio of a parcel of moist air is the ratio of the mass of water vapor to the mass of dry air.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. The air temperature deficit is the air temperature threshold minus the air temperature. Its integral with respect to time is often called after its units of "degree-days".

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. The air temperature excess is the air temperature minus the air temperature threshold. Its integral with respect to time is often called after its units of "degree-days".

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Depth is the vertical distance below the surface.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). "Longwave" means longwave radiation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). "Shortwave" means shortwave radiation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). "Shortwave" means shortwave radiation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "toa" means top of atmosphere. "Longwave" means longwave radiation. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. The ISCCP cloud area fraction is diagnosed from atmosphere model output by the ISCCP simulator software in such a way as to be comparable with the observational diagnostics of ISCCP (the International Satellite Cloud Climatology Project).

alias: longwave_radiance

"longwave" means longwave radiation. Radiance is the radiative flux in a particular direction, per unit of solid angle. If radiation is isotropic, the radiance is independent of direction, so the direction should not be specified. If the radiation is directionally dependent, a standard name of upwelling or downwelling radiance should be chosen instead.

alias: shortwave_radiance

"shortwave" means shortwave radiation. Radiance is the radiative flux in a particular direction, per unit of solid angle. If radiation is isotropic, the radiance is independent of direction, so the direction should not be specified. If the radiation is directionally dependent, a standard name of upwelling or downwelling radiance should be chosen instead.

alias: spectral_radiance

"spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. Radiance is the radiative flux in a particular direction, per unit of solid angle. If radiation is isotropic, the radiance is independent of direction, so the direction should not be specified. If the radiation is directionally dependent, a standard name of upwelling or downwelling radiance should be chosen instead.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.

alias: omega

alias: vertical_air_velocity_expressed_as_tendency_of_pressure

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.

alias: upward_air_velocity_expressed_as_tendency_of_sigma

alias: vertical_air_velocity_expressed_as_tendency_of_sigma

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of sigma plays the role of the upward component of air velocity when the atmosphere sigma coordinate (a dimensionless atmosphere vertical coordinate) is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of sigma; downwards is positive. See Appendix D of the CF convention for information about dimensionless vertical coordinates.

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.

X_binary_mask has 1 where condition X is met, 0 elsewhere. 1 = land, 0 = sea.

A variable with the standard name of land_cover contains strings which indicate the nature of the anthropogenic land use or vegetation e.g. urban, grass, needleleaf trees, ice. These strings have not yet been standardised. The alternative standard name of surface_cover is a generalisation of land_cover. Alternatively, the data variable may contain integers which can be translated to strings using flag_values and flag_meanings attributes.

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. The land ice basal melt rate is the rate at which ice is lost per unit area at the base of the ice.

A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. The land ice calving rate is the rate at which ice is lost per unit area through calving into the ocean.

"lwe" means liquid water equivalent. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. The land ice basal melt rate is the rate at which ice is lost per unit area at the base of the ice.

"lwe" means liquid water equivalent. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. The land ice calving rate is the rate at which ice is lost per unit area through calving into the ocean.

"lwe" means liquid water equivalent. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. Specific mass balance means the net rate at which ice is added per unit area at the land ice surface.

"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. Specific mass balance means the net rate at which ice is added per unit area at the land ice surface.

"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. The vertical mean land ice velocity is the average from the bedrock to the surface of the ice.

A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. The vertical mean land ice velocity is the average from the bedrock to the surface of the ice.

A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock.

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

No help available.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Latitude is positive northward; its units of degree_north (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_latitude should be used instead of latitude. Grid latitude is positive in the grid-northward direction, but its units should be plain degree.

"X_area" means the horizontal area occupied by X within the grid cell.

"Content" indicates a quantity per unit area.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).

"Content" indicates a quantity per unit area. "Litter carbon" is dead inorganic material in or above the soil quantified as the mass of carbon which it contains.

"Litter carbon" is dead inorganic material in or above the soil quantified as the mass of carbon which it contains. The litter carbon flux is the rate of production of litter. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Longitude is positive eastward; its units of degree_east (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_longitude should be used instead of longitude. Grid longitude is positive in the grid-eastward direction, but its units should be plain degree.

"lwe" means liquid water equivalent.

"lwe" means liquid water equivalent.

"lwe" means liquid water equivalent.

"lwe" means liquid water equivalent.

"lwe" means liquid water equivalent.

"lwe" means liquid water equivalent.

"lwe" means liquid water equivalent. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. "Canopy" means the plant or vegetation canopy. The canopy water is the water on the canopy.

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.

"frozen_water" means ice. "lwe" means liquid water equivalent. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.

"lwe" means liquid water equivalent. "moisture" means water in all phases contained in soil. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.

"lwe" means liquid water equivalent. "moisture" means water in all phases contained in soil. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used.

The surface called "surface" means the lower boundary of the atmosphere. "lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.

"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".)

"lwe" means liquid water equivalent. "Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".)

The surface called "surface" means the lower boundary of the atmosphere. "magnitude_of_X" means magnitude of a vector X. "Downward" indicates a vector component which is positive when directed downward (negative upward).

Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. Condensed water means liquid and ice.

Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y.

Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Mass_fraction_of_ammonium" means that the mass is expressed as mass of NH4. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing.

"condensed_water" means liquid and ice. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

alias: mass_fraction_of_convective_condensed_water_in_air

"condensed_water" means liquid and ice. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). Convective cloud is that produced by the convection schemes in an atmosphere model.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). Convective cloud is that produced by the convection schemes in an atmosphere model.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water.

"frozen_water" means ice. "moisture" means water in all phases contained in soil. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Mass_fraction_of_nitrate" means that the mass is expressed as mass of NO3. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water.

alias: mass_fraction_of_o3_in_air

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of, respectively, "relative_humidity" and "air_temperature".

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Pm1 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 1 micrometer. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of, respectively, "relative_humidity" and "air_temperature".

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of, respectively, "relative_humidity" and "air_temperature".

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except black carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Secondary particulate organic matter " means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Mass_fraction_of_sulfate" means that the mass is expressed as mass of SO4. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water.

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

"moisture" means water in all phases contained in soil. "unfrozen_water" means liquid and vapour. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

"Water" means water in all phases. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol.

Model level number should be understood as equivalent to layer number.

cloud_base refers to the base of the lowest cloud. Model level number should be understood as equivalent to layer number. Convective cloud is that produced by the convection schemes in an atmosphere model.

cloud_top refers to the top of the highest cloud. Model level number should be understood as equivalent to layer number. Convective cloud is that produced by the convection schemes in an atmosphere model.

Model level number should be understood as equivalent to layer number.

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s). The field capacity of soil is the maximum content of water it can retain against gravitational drainage.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. The construction expressed_as_nitrogen means that the mole concentration is that of nitrogen atoms due to the diatoms. Diatoms are single-celled phytoplankton with an external skeleton made of silica. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. The construction expressed_as_nitrogen means that the mole concentration is that of nitrogen atoms due to the mesozooplankton. Mesozooplankton are large protozoans (single-celled organisms) and small metazoans (multi-celled organisms) sized between 2x10-4 m and 2x10-2 m that feed on other plankton and telonemia.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. The construction expressed_as_nitrogen means that the mole concentration is that of nitrogen atoms due to the microzooplankton. Microzooplankton are protozoans (single-celled organisms) sized between 2x10-5 m and 2x10-4 m that feed on other plankton and telonemia.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. The construction expressed_as_nitrogen means that the mole concentration is that of nitrogen atoms due to the organic detritus. Organic detritus are particles of debris from decaying plants and animals.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. The construction expressed_as_silicon means that the mole concentration is that of silicon atoms due to the organic detritus. Organic detritus are particles of debris from decaying plants and animals.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. The construction expressed_as_nitrogen means that the mole concentration is that of nitrogen atoms due to the phytoplankton. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.

Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical symbol of atomic bromine is Br.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical symbol of atomic chlorine is Cl.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical symbol of atomic nitrogen is N.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of bromine chloride is BrCl.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of bromine monoxide is BrO.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of bromine nitrate is BrONO2.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of carbon tetrachloride is CCl4.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC11 is CFCl3. The IUPAC name for CFC11 is trichloro-fluoro-methane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of chlorine dioxide is OClO.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of chlorine monoxide is ClO.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of chlorine nitrate is ClONO2.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of dichlorine peroxide is Cl2O2.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of dinitrogen pentoxide is N2O5.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon1202 is CBr2F2. The IUPAC name for halon 1202 is dibromo-difluoro-methane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon1211 is CBrClF2. The IUPAC name for halon 1211 is bromo-chloro-difluoro-methane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon1301 is CBrF3. The IUPAC name for halon 1301 is bromo-trifluoro-methane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon2402 is C2Br2F4. The IUPAC name for halon 2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen bromide is HBr.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen chloride is HCl.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen cyanide is HCN.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen peroxide is H202.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydroperoxyl radical is HO2.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hypobromous acid is HOBr.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hypochlorous acid is HOCl.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. "Inorganic chlorine",sometimes referred to as Cly, describes a family of chemical species which result from the degradation of chlorine-containing source gases (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as sea-salt and other aerosols. mole_fraction_of_inorganic_chlorine is the sum of all species belonging to the family that are represented within a given model.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of methyl bromide is CH3Br.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of methyl chloride is CH3Cl.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of methyl hydroperoxide is CH3OOH.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of molecular hydrogen is H2.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of nitrous oxide is N2O.

alias: mole_fraction_of_o3_in_air

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of peroxynitric acid is HNO4.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. "Inorganic bromine",sometimes referred to as Bry, describes a family of chemical species which result from the degradation of bromine-containing source gases (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, sea-salt and other aerosols. mole_fraction_of_inorganic_bromine is the sum of all species belonging to the family that are represented within a given model.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. "Reactive nitrogen", sometimes referred to as Noy, describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) and chlorine nitrate (ClONO2).

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of water vapor is H2O.

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of carbon monoxide is CO.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of carbon tetrachloride is CCl4.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of CFC11 is CFCl3. The IUPAC name for CFC11 is trichloro-fluoro-methane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of halon1202 is CBr2F2. The IUPAC name for halon 1202 is dibromo-difluoro-methane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of halon1211 is CBrClF2. The IUPAC name for halon 1211 is bromo-chloro-difluoro-methane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of halon1301 is CBrF3. The IUPAC name for halon 1301 is bromo-trifluoro-methane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of halon2402 is C2Br2F4. The IUPAC name for halon 2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of HCC140a is CH3CCl3. The IUPAC name for HCC 140a is 1,1,1-trichloroethane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of HCFC22 is CHClF2. The IUPAC name for HCFC 22 is chloro-difluoro-methane.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of methane is CH4.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of methyl bromide is CH3Br.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of methyl chloride is CH3Cl.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of molecular hydrogen is H2.

moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.

moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.

moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.

The construction "moles_of_X_in_atmosphere" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of nitrous oxide is N2O.

moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.

moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.

moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.

"longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Fluxes at the top_of_atmosphere_model differ from TOA fluxes only if the model TOA fluxes make some allowance for the atmosphere above the top of the model; if not, it is usual to give standard names with toa to the fluxes at the top of the model atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Net primary productivity is the excess of gross_primary_producivity (rate of synthesis of biomass per unit area from inorganic precursors by autotrophs, or "producers", especially by photosynthesising plants using sunlight for energy) over the rate at which they themselves respire some of this biomass (plant_respiration, assuming all producers to be plants). "Productivity of carbon" refers to the production of biomass expressed as the mass of carbon which it contains.

"longwave" means longwave radiation. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Net absorbed radiation is the difference between absorbed and emitted radiation.

"shortwave" means shortwave radiation. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Net absorbed radiation is the difference between absorbed and emitted radiation.

"longwave" means longwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"shortwave" means shortwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Normalized_difference_vegetation_index", usually abbreviated to NDVI, is an index calculated from reflectances measured in the visible and near infrared channels. It is calculated as NDVI = (NIR - R) / (NIR + R) where NIR is the reflectance in the near-infrared band and R is the reflectance in the red visible band. Reflectance is the ratio of the reflected over the incoming radiation in each spectral band. The calculated value of NDVI depends on the precise definitions of the spectral bands and these definitions may vary between different models and remote sensing instruments.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.

"Northward" indicates a vector component which is positive when directed northward (negative southward). "Atmosphere heat transport" means total heat transport by the atmosphere by all processes.

"Water" means water in all phases. "Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.

"Eliassen Palm flux" is a widely used vector in the meridional plane, and the divergence of this flux appears as a forcing in the Transformed Eulerian mean formulation of the zonal mean zonal wind equation. "Northward" indicates a vector component which is positive when directed northward (negative southward).

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Northward" indicates a vector component which is positive when directed northward (negative southward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Ocean transport means transport by all processes, both sea water and sea ice.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by diffusion means the part due to horizontal or isopyncal diffusion schemes in an ocean model, but not including the "bolus" or Gent-McWilliams velocity.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by the ocean gyre is geometrically defined as being the part due to the vertical integral of the product of deviations of velocity and tracer from their zonal means. The velocity does not include "bolus" or Gent-McWilliams velocity.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by (meridional) overturning is geometrically defined as being the part due to the vertical integral of the product of zonal means of velocity and tracer. The velocity does not include "bolus" or Gent-McWilliams velocity.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Ocean transport means transport by all processes, both sea water and sea ice.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by diffusion means the part due to horizontal or isopyncal diffusion schemes in an ocean model, but not including the "bolus" or Gent-McWilliams velocity.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by the ocean gyre is geometrically defined as being the part due to the vertical integral of the product of deviations of velocity and tracer from their zonal means. The velocity does not include "bolus" or Gent-McWilliams velocity.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by (meridional) overturning is geometrically defined as being the part due to the vertical integral of the product of zonal means of velocity and tracer. The velocity does not include "bolus" or Gent-McWilliams velocity.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Ocean transport means transport by all processes, both sea water and sea ice.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by diffusion means the part due to horizontal or isopyncal diffusion schemes in an ocean model, but not including the "bolus" or Gent-McWilliams velocity.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by the ocean gyre is geometrically defined as being the part due to the vertical integral of the product of deviations of velocity and tracer from their zonal means. The velocity does not include "bolus" or Gent-McWilliams velocity.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by (meridional) overturning is geometrically defined as being the part due to the vertical integral of the product of zonal means of velocity and tracer. The velocity does not include "bolus" or Gent-McWilliams velocity.

A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). Sea ice velocity is defined as a two-dimensional vector, with no vertical component.

A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).

"Northward" indicates a vector component which is positive when directed northward (negative southward).

"Northward" indicates a vector component which is positive when directed northward (negative southward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Wind shear is the derivative of wind with respect to height.

No help available.

"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. Depth is the vertical distance below the surface.

No help available.

The ocean meridional overturning streamfunction should not include not include "bolus" or Gent-McWilliams velocity.

The ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. Various criteria are used to define the mixed layer; this can be specified by using a standard name of ocean_mixed_layer_defined_byX.

The ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by the mixing scheme is a diagnostic of ocean models.

The ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma or sigma_theta is the level at which the quantity indicated differs from its surface value by a certain amount.

The ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma or sigma_theta is the level at which the quantity indicated differs from its surface value by a certain amount.

The ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma or sigma_theta is the level at which the quantity indicated differs from its surface value by a certain amount.

See Appendix D of the CF convention for information about dimensionless vertical coordinates.

See Appendix D of the CF convention for information about dimensionless vertical coordinates. Note that the ocean sigma coordinate is not the same quantity as sea water sigma (excess of density over 1000 kg m-3), for which there are various other standard names.

No help available.

"X_volume_fraction" means the fraction of volume occupied by X.

"Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Omnidirectional spherical irradiance is the radiation incident on unit area of a spherical (or "4-pi") collector. It is sometimes called "scalar irradiance". Radiation incident on a 2-pi collector has standard names of "spherical irradiance" which specify up/downwelling.

"spectral" means per unit wavelength or as a function of wavelength; spectral quantities are sometimes called "monochromatic". Radiation wavelength has standard name radiation_wavelength. Omnidirectional spherical irradiance is the radiation incident on unit area of a spherical (or "4-pi") collector. It is sometimes called "scalar irradiance". Radiation incident on a 2-pi collector has standard names of "spherical irradiance" which specify up/downwelling.

The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets).

No help available.

"Respiration carbon" refers to the rate at which biomass is respired expressed as the mass of carbon which it contains. Plant respiration is the sum of respiration by parts of plants both above and below the soil. Plants which photosynthesise are autotrophs i.e. "producers" of the biomass which they respire from inorganic precursors using sunlight for energy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship. The platform course is the direction in which the platform is travelling (not necessarily the same as the direction in which it is pointing, called platform_orientation).

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship. The platform orientation is the direction in which the "front" or longitudinal axis of the platform is pointing (not necessarily the same as the direction in which it is travelling, called platform_course).

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

"wrt" means with respect to. Speed is the magnitude of velocity. Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship. The platform speed with respect to air is often called the "air speed" of the platform.

"wrt" means with respect to. Speed is the magnitude of velocity. Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship. The platform speed with respect to ground is relative to the solid Earth beneath it i.e. the sea floor for a ship. It is often called the "ground speed" of the platform.

"wrt" means with respect to. Speed is the magnitude of velocity. Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane or ship.

"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Atmosphere potential vorticity is the vertically averaged absolute vorticity of a layer of the atmosphere divided by the pressure difference from the bottom to the top of the layer.

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Ocean potential vorticity is the vertically averaged absolute vorticity of a layer of the ocean divided by the thickness of the layer.

"Amount" means mass per unit area.

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

Unless indicated, a quantity is assumed to apply to the whole area of each horizontal grid box. The qualifier where_type specifies instead that the quantity applies only to the part of the grid box of the named type. "Canopy" means the plant or vegetation canopy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.

"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. Specific humidity is the mass fraction of water vapor in (moist) air.

"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). The unit of salinity is PSU, which is dimensionless. The units attribute should be given as 1e-3 or 0.001 i.e. parts per thousand if salinity is in PSU.

"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).

"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Specific humidity is the mass fraction of water vapor in (moist) air. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Upward" indicates a vector component which is positive when directed upward (negative downward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Upward air velocity is the vertical component of the 3D air velocity vector.

"product_of_X_and_Y" means X*Y. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). The unit of salinity is PSU, which is dimensionless. The units attribute should be given as 1e-3 or 0.001 i.e. parts per thousand if salinity is in PSU.

"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).

"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. "Northward" indicates a vector component which is positive when directed northward (negative southward). Specific humidity is the mass fraction of water vapor in (moist) air. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)

"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Upward" indicates a vector component which is positive when directed upward (negative downward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Upward air velocity is the vertical component of the 3D air velocity vector.

"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.

"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Upward air velocity is the vertical component of the 3D air velocity vector.

"product_of_X_and_Y" means X*Y. "specific" means per unit mass. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Specific humidity is the mass fraction of water vapor in (moist) air. Upward air velocity is the vertical component of the 3D air velocity vector.

"x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. Projection coordinates are distances in the x- and y-directions on a plane onto which the surface of the Earth has been projected according to a map projection. The relationship between the projection coordinates and latitude and longitude is described by the grid_mapping.

"y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. Projection coordinates are distances in the x- and y-directions on a plane onto which the surface of the Earth has been projected according to a map projection. The relationship between the projection coordinates and latitude and longitude is described by the grid_mapping.

Potential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.

No help available.

A velocity is a vector quantity. "Radial velocity away from instrument" means the component of the velocity of the scatterers along the line of sight of the instrument where positive implies movement away from the instrument (i.e. outward). The "instrument" (examples are radar and lidar) is the device used to make the observation, and the "scatterers" are what causes the transmitted signal to be returned to the instrument (examples are aerosols, hydrometeors and refractive index irregularities), of whatever kind the instrument detects.